NXRTi USER’S MANUAL
UNINTERRUPTIBLE POWER SUPPLY (UPS)
Xtreme Power Conversion Corporation (Rev 8/29/13)
Page 27
•
Exit from the setting interface. Press and hold function setting button
for more than
2 seconds, exit from the setting interface and return to the main interface.
•
After setting bPS as ON, when utility power is plugged in without turning on the UPS, or no
utility power is plugged in, there is bypass output but no power down backup function.
Parameter Inquiring
Press and hold the inquiring button
for more than ½ second but less than 2
seconds to inquire about items. Items can include: input, battery, output, load, and temperature. The
displayed items on LCD screen are showed as following:
Output
：
Display the output voltage and output frequency of the UPS. As the following graphic shows,
the output voltage is 220v, the output frequency is 50Hz.
Load
: Display the numerical value of the active power in WATTs and apparent power in VA of the load.
For example, as the following graphics shows: the WATT of the load is 100w, VA is 100VA. Please note
that when the load is disconnected, it is a normal to see a small numerical value of WATT and VA.
