NXRTi USER’S MANUAL
UNINTERRUPTIBLE POWER SUPPLY (UPS)
Xtreme Power Conversion Corporation (Rev 8/29/13)
Page 24
Parameter Setting
•
The UPS has a setting function. It can run the setting function in any mode. After setting, the
changes will become effective at once when. The set information can be saved only when the
battery is connected and following normal power off process.
The operation of settings are as following:
ECO mode setting
•
Enter the setting interface. Press and hold the function setting key
for more than 2
seconds, the letters ECO will flash as following:
•
Enter the ECO setting interface. Press and hold the function setting button
for more
than ½ second but less than 2 seconds, then come to setting interface of ECO, the letters “ECO”
will light for a long time. The “ON” below the ECO will flash. Press and hold the inquiring button
for more than ½ second but less than 2 seconds to determine whether the ECO
function is used or not. If used, the corresponding word is “ON”, if not, the word is “OFF”.
