NXRTi USER’S MANUAL
UNINTERRUPTIBLE POWER SUPPLY (UPS)
Xtreme Power Conversion Corporation (Rev 8/29/13)
Page 26
•
Enter the Bypass output setting interface. Press and hold the function setting button
for more than ½ second but less than 2 seconds, at this time the letters “bPS” will light for an
extended period. The “ON” below the bPS will flash. Press and hold the inquiring button
for more than ½ second but less than 2 seconds to determine whether the bPS
function is used or not. If used, the corresponding word is “ON”, if not, the word is “OFF”.
•
Confirm the Bypass output setting interface. After selecting ON or OFF, press and hold the
function setting button
for more than 2 seconds. The bPS setting function is
completed and the “ON” or “OFF” below the “bPS” will light without flash.
