Select a Group number to use. There is no requirement for using any
particular Group number, but it's recommended that you start with Group 1
and work your way down as needed.
Figure 19 – Group Setup menu
The Group Setup has the following options:
Setup Master – defining the master servo and its settings
Setup Slave – setting up the slave servo
Start AutoMatch – starts the AutoMatch process
Selecting the Setup Master option will let you define all of the same
parameters found in normal Output Port setup (described above). The
menus and functions are the exact same, so any changes here will also
affect the Output Port setup as well. While setting up the master, only the
servo defined by the Port can be moved using your transmitter. All other
servos are disabled while setting up the master servo.
Selecting the Setup Slave option will let you define the port that the slave
will use, the direction of the servo travel, and the center offset, and if the
slave servo is enabled or not.
When you select Start AutoMatch, the matching process begins.
37
