Xtralis VESDA VLC-505, Manual

Page: 229 / 367

5
15. Project Configuration
❑
a. Double-click the ASPIRE33 desktop icon
b. Verify Enforced Limit is set to NFPA
c. Verify Interface is set to Advanced
d. Rename New Project
•
Right-click New Project
•
Select Rename
•
Change the name to Aspire Project
•
Click Enter
e. Add a detector
•
Click Add a new detector to the project icon
•
Set Detector Type to: VEP Detector
•
Change Detector Name to Ceiling
•
Set Aspirator Speed to 2
f. Add pipe
1. Click Add a new pipe to this detector icon
•
Name the pipe Ceiling Right
•
Select Simple pipe
•
Set Number of bends before 1
st
Hole to 1
•
Click Finish
2. In the Toolbar , click the Calculate icon
3. In the Direction column :
•
Double-click the F elbow
•
Select R to redirect the pipe
g. Copy pipe
1. From the Device Tree , click Ceiling Right pipe
•
Click Edit
•
Select Copy
•
Click Edit
•
Select Paste
•
Rename Copy of Ceiling Right to Ceiling Left
2. In the Direction column :
•
Double-click the R elbow
•
Select L to redirect the pipe
3. In the Toolbar , click the Calculate icon
4. In the lower left-hand corner , click the Enlarge View arrow
•
Click Save Design icon