WARNING: The noise level may differ from the declared values when handling the device,
depending on the way the device is handled.
Intended use
The cordless grass trimmer is only intended for cutting grass, light weeds. It should not be used for
any other purpose such as hedge cutting as this may cause injury.
1. Be familiar with the controls and proper use of the equipment.
2. Cutting elements continue to rotate after the motor is switched off.
3. Never allow children or people unfamiliar with the instructions to use the machine. Local reg-
ulations may restrict the age of the operator.
4. Stop using the machine while people, espe-cially children, or pets are nearby.
5. Only use the machine in daylight or good artificial light. Avoid using the machine in bad weather
conditions especially when there is a risk of lightning.
6. Before using the machine and after any impact, check for signs of wear or damage and repair as
necessary.
7. Take care against injury from any device fitted for trimming the filament line length. After
extending new cutter line always return the machine to its normal operating position before
switching on.
8. Never fit metal cutting elements.
9. This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
10. Use the tool with the utmost care and attention.
11. Operate the tool only if you are in good physical condition. Perform all work calmly and
carefully. Use common sense and keep in mind that the operator or user is responsible for accidents
or hazards occurring to other people or their property.
12. Never operate the tool when tired, feeling ill or under the influence of alcohol or drugs.
13. The tool should be switched off immediately if it shows any signs of unusual operation.
14. Keep fingers away from switch trigger when not operating the tool and when moving from one
operating position to another.
OPERATION
WARNING: Wear eye and ear protection.
Summary of Contents for XT102910
Page 18: ......
