1. Indicator lamps
2. Check button
Indicating the remaining battery capacity
Press the check button on the battery cartridge to indi- cate the remaining battery capacity. The
indicator lamps light off immediately when release the check button.
NOTE: Depending on the conditions of use and the ambient temperature, the indication may
differ slightly from the actual capacity.
1
2
Tool / battery protection system
The tool is equipped with a tool/battery protection sys- tem. This system automatically cuts off
power to the motor to extend tool and battery life. The tool will auto- matically stop during
operation if the tool or battery is placed under one of the following conditions:
Overload protection
When the battery is operated in a manner that causes it to draw an abnormally high current, the
tool automati- cally stops. In this situation, turn the tool off and stop the application that caused
the tool to become overloaded. Then turn the tool on to restart.
Overheat protection
When the battery is overheated, the tool stops automat- ically. In this case, let the tool and
battery cool before turning the tool on again.
Overdischarge protection
When the battery capacity is not enough, the tool stops automatically. In this case, remove the
battery from the tool and charge the battery.
Switch action
WARNING: Before installing the battery cartridge into the tool, always check to see that the
switch trigger actuates properly and returns to the "OFF" position when released.
WARNING: For your safety, this tool is equipped with the lock-off button which prevents the
tool from unintended starting. Never use the tool if it starts when you pull the switch trigger
without pressing the lock-off button. Ask local Service Center XTline for repairs.
WARNING: Never disable the lock function or tape down the lock-off button.
NOTICE: Do not pull the switch trigger forcibly without pressing the lock-off button. The
switch may break.
Indicator lamps
Remaining
capacity
Lighted
Off
75% to 100%
25% to 50%
10% to 25%
Summary of Contents for XT102910
Page 18: ......