8
Customer Service 1-888-707-1880
Dyaco Canada Inc. 2021
Email: [email protected]
1
2
#99
. 5/16” x1/2”
Hex Head Bolt (8 pcs)
#100
. Ø 8x1.5T
Flat Wash (8 pcs)
Hardware Step 2
XT98
ASSEMBLY INSTRUCTIONS
MAIN BASE FRAME
1.
Remove the treadmill from the carton and lay it on flat, level
ground.
UPRIGHTS & CABLES
NOTE:
This step may work better with a second person assisting.
1.
Connect the Lower Computer Cable (
55
) and Middle Computer
Cable (
54
).
2.
Insert Right and Left Uprights (
4
) and (
5
) into the Frame Base (
2
)
and use 13mm Wrench (
90
) to tighten the 8pcs Hex Head Bolts
(
99
) and 8pcs Flat Washers (
100
).
Be very careful when assembling the uprights so as not to pinch the computer cables. This
could lead to a short circuit and may damage the electronics and is not covered under
warranty.