13
Customer Service 1-888-707-1880
Dyaco Canada Inc. 2021
Email: [email protected]
CONSOLE OPERATION
START OPERATION
1.
Attach the Safety key to enable the display (if not already on).
2.
Press the
START
key to begin belt movement. Adjust to the desired speed using the
SPEED
▲
/
▼
keys
(console or handgrip). You may also use the
SPEED
keys
1,2,4,6,8,10
to adjust the speed.
3.
To slow tread-belt press and hold the
SPEED
▼
key (console or handgrip) to the desired speed. You may also
press the
SPEED
keys
1,2,4,6,8,10
to adjust the speed.
4.
To stop the tread-belt press the
STOP
key or pull away Safety key.
PAUSE/STOP/RESET FEATURE
1.
When the treadmill is running the pause feature may be utilized by pressing the
STOP
key once. This will
slowly decelerate the tread-belt to a stop. The incline will go to zero percent. The Time, Distance and Calorie
readings will hold while the unit is in the pause mode. After five minutes, the display will reset and return to
the start up screen.
2.
To resume your exercise, when in Pause mode, press the
START
key. The speed and incline will return to
their previous settings.
•
Pause is executed when the
STOP
key is pressed once. If the
STOP
key is pressed a second time the
program will end. If the
STOP
key is pressed a third time, the console will reset.
INCLINE FEATURE
•
Incline may be adjusted any time after belt movement.
•
Press the
INCLINE
▲
/
▼
keys to achieve desired level of effort.
Six
access key of
2, 4, 6,8,10
and
12
are also
available to adjust the incline percent. The incline range is from 0 to 12 levels.
•
The display will indicate incline position as adjustments are made.
PULSE GRIP FEATURE
The Pulse (Heart Rate) readout will display your current heart rate in beats per minute during the workout. You
must use both stainless-steel sensors on the side hand rails to display your pulse. Pulse value displays anytime the
upper display is receiving a Pulse signal.
CALORIE DISPLAY
Displays the cumulative calories burned at any given time during your workout.
Note
: This is only a rough guide used for comparison of different exercise sessions, which cannot be used for
medical purposes.
TO TURN TREADMILL OFF
1.
Remove tether cord.
2.
Turn off the main switch on the front of the treadmill, below the motor cover.
TO TURN OFF AUDIBLE BEEP
1.
If you want to turn off the audible beep sound that occurs when you press keys, etc., follow the instructions
in Engineering Mode.
