Xterra 16004000980 Owner'S Manual Download Page 4

Page: 4 / 36

Customer Service 1-888-707-1880

Dyaco Canada Inc. 2021

Email: [email protected]

IMPORTANT SAFETY INSTRUCTIONS

THIS UNIT IS INTENDED FOR HOUSEHOLD USE ONLY

READ ALL INSTRUCTIONS BEFORE USING THIS TREADMILL

CAUTION:

Before starting any exercise program, it is recommended that you consult your

physician.

WARNING:

Connect this unit to a properly grounded outlet only.

DANGER:

To reduce the risk of electric shock, always unplug the treadmill from the electrical

outlet immediately after using and before cleaning.

WARNING:

To reduce the risk of burns, fire, electric shock, or injury to persons:

Grounding Instructions

This product must be grounded. If it should malfunction or breakdown, grounding provides a

path of least resistance for electric current to reduce the risk of electric shock. This product is

equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug

must be plugged into an appropriate outlet that is properly installed and grounded in

accordance with all local codes and ordinances. See diagram below for grounding methods.

1. Use 120-volt a.c. household current on a dedicated circuit.

It is the responsibility of the owner to ensure that all users of this treadmill are adequately

informed of all warnings and precautions.

2. The use of an extension cord with this product is not recommended. If an extension cord is

needed, use a short (less than 10 feet) heavy gauge (14 gauge or better) extension cord

with a three prong (grounded) plug and receptacle.

3. Never leave the treadmill unattended when plugged in. Remove the safety key and unplug

the unit from the outlet when not in use and before removing or replacing parts.

4. Never operate the treadmill if it has a damaged cord or plug, if it is not working properly, if it

has been dropped, damaged, or exposed to water. Never move the treadmill belt while the

power is turned off.

5. Do not pull the treadmill by the power supply cord or use cord as a handle. Keep cord away

from heated surfaces and open flames.

6. Fitness equipment must always be installed and used on a flat surface. Do not use

outdoors or near water. Do not place the unit on a loose rug or uneven surface. It is

recommended to use an equipment mat to prevent the unit from moving while it is being

used, which could possibly scratch or damage the surface of your floor. It is recommended

to have a minimum of 3 metres safe clearance on all sides of the treadmill while in use.

7. Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a

garage, covered patio or near water.

Summary of Contents for 16004000980





































Search results

Summary of Contents for 16004000980

Reviews:

Related manuals for 16004000980

Brands by name

Popular brands

Xterra 16004000980, Owner'S Manual

Search results

Summary of Contents for 16004000980

Reviews:

Related manuals for 16004000980

Brands by name

Popular brands