XtendLan XL-GDB series User’s Guide
output control signal; while the normal mode turns on the output control signals according to input
control signals.
5.2.1.2.3 V54
The V54 menu shows current V54 mode (either disable or enable) by placing asterisk (*) by the
desired selection. To change the V54 mode, key in the desired selection and hit “Enter”.
5.2.1.2.4 CLOCK
The clock menu shows the current DTE clock polarity status (either normal or inverted) by placing
an asterisk (*) by the appropriate selection. To change the DTE clock polarity, key in the desired
selection and hit Enter. When normal is selected, data from DTE is sampled using rising edge. For
inverted selection, the sampling is using the falling edge of the clock. Clock can be set up both at
STU-C and STU-R side. Note: To change the setting of Clock at STU-R through remote logon
from STU-C is invaild.
25
Summary of Contents for XL-GDB101E
