XtendLan XL-GDB series User’s Guide
5.5.1.4 Set Rate Menu
The data rate for network interface is set at the STU-C (Central Site) only. After configuration, the
SHDSL system will use the line rate, which has been requested by user. User can select the
desired rate (from 3 to 24). Whenever an asterisk appears under a number, the associated time
slot/64K channel is enabled and contains data to be transmitted between the two SHDSL units.
5.5.1.5 Primary Clock Menu (PCLK)
Primary clock menu is set at STU-C and used to configure the primary clock source; it shows the
current clock source as internal, the T1 interface port or DSL by placing an asterisk (*) by the
appropriate selection. To change the selection, key in the desired selection and hit Enter.
5.5.1.6 Backup Menu
Please refer to section 5.2.1.7 Backup Menu for details.
5.5.1.7 Recall Menu
Please refer to section 5.2.1.7 Recall Menu for detail information.
5.5.1.8 Default Menu
Please refer to section 5.2.1.8 Default Menu for detail information.
78
Summary of Contents for XL-GDB101E
