16
7.2.
Access Controller Programming
Items
Descriptions
Factory setting
-1. Access Security
To activate or deactivate the Access Security Controller inside the
Door Station, however, it is useless to a Door Station without
Access security controller inside. If set to 1, activate; set to 0,
deactivate.
According to
Door Station
-2. Passive Address
Only used in a network Access security system and managed by
means of
IDS software Access Module
. If set to 1, the Access
security Controller is tied with the Door Station
Net Address
, using
an associated address automatically. If set 0, the address of Access
Security Controller must be assigned by manual.
[1]
Associated
-3. ACS address
Only used in a network Access security system and managed by
means of
IDS software Access Module
and
Passive Address
parameter is set to 0. The ACS address is 3-digits format, just like
Net Address
, and ranges from 121 to 240.
Automatically,
Don’t modify it.
-4. Clock
To configure date and time, only available when the Door Station
has Access security function. Enter date ant time, then confirm.
Time zone
(GMT+08:00)
-5. Unlock Verify
To configure double-check unlock function, only available when the
Door Station has Access security function.
If set to 1, you have to input Common Unlock Code for verification,
after you show a valid IC card; set to 0, no verification is needed.
[0]
No verification
-
About Clock
There is a RTC in access
controller and
the
date
and time is displayed in
caption line of menu.
Door Station with access
security function always
uses its own RTC clock.
Please note, for a Door Station without Access Security, the Clock will be processed as below:
-
If works in a networked system, date and time are synchronized automatically by Guard Unit clock;
-
If works without Guard Unit online, the caption will display “
WELCOME
”, instead of date and time.
