Make sure you have all necessary parts, tools as suggested on manual cover.
1. Determine a convenient location to mount your faucet. This can be existing sink hole in the
sink top, or you may drill another hole into the sink. As you determine the location of your
faucet, consider the container you will use with appliance, such as a large cooking pan.
Location of the hole should also provide easy access for tank connections.
2. The thickness of the sink must be less than 70mm.
3. Before connecting to the power source, the dispenser must be filled with water and the
thermostat turned to the OFF position.
4. Do not use an extension cord with this appliance. Appliance must be within 914mm of the
power source.
5. Plumbing connections must comply with all local codes and ordinances.
6. Do not use any pipe sealing compounds as they may get inside the dispenser causing an
objectionable taste and odour.
IMPORTANT:
Observe all governing codes and ordinances.
Faucet may be installed in spray hose opening in sink or drilled hole. If drilling another hole is needed,
the 35mm max. dia. hole is required.
Tank must be mounted vertically.
Quick-connector fittings connects to cold water supply line
See step 4 of installation for optional connections and instructions.
