Pentair Pool Products PB4RO-75, User Manual

Page: 1 / 22

PB4RO-75 Specifications Your Water
Pressure Range: 40–100 psi
(2.8–6.9 bar)
Temperature Range: 40–100°F
(4.4-37.8°C)
Total Dissolved Solids < 2000 ppm
Maximum Hardness* † : 10 gpg
(171 mg/L)
Sulfide, Iron and Manganese † : < 0.1
Chlorine in Water Supply: < 2 ppm
Water Supply pH Limits: 3-11
Turbidity: 5 NTU Max.
Date of Purchase:
• Hand or Elect ric Drill • P
• 2 Adjustable Wrenches • D
• File • T
• Pencil • S
• Needle-nose Pliers • T
• Utility Knife or Tube Cutter
• Hand or Electric D rill • C
• Drill Bits: 1/4" and 3/4" • R
• Teflon ® Tape • 1
• Head Assembly • D
• Screws for mounti ng •
• Lead-free air gap
water faucet
drinking • Q
• Silicone grease • S
• Tank Valve • F
• Teflon ® Tape • C
• 3/8" Plastic Tubing • 1
(red and blue) (
• TDS Test Kit
• Filter Cartridges:
Model PB4RO-75 Undersink Reverse Osmosis System
User Manual
OPERATING SPECIFICATIONS
WARNING: Before installing the system, make certain
your water supply complies with the
following operating specifications. Failure
to do so may reduce the effectiveness
of the system and will void the warranty.
Consult your local water treatment utility
or a certified water testing lab to determine
the quality for your water and use the table
below to record your results for future
reference.
Tools Required
(for plastic tubing)
Optional Materials
hillips Screwdrivers
rill Bits: 1/8", 1/4" and 3/8"
owel
afety Glasses
ape Measure
(For sinks without extra hole for faucet)
enter punch
espirator
-3/8" Bi-metal or Carbide
Tipped Hole-saw
NOTE: All tools listed will not be necessary for installation.
Read installation procedures before starting to
determine required tools.
Parts Included
*
If the hardness of your water is above 10 gpg (171 mg/L), lime scale will build
up rapidly on the membrane inside of the RO membrane cartridge. Scale
buildup will plug the RO membrane cartridge and make the system ineffective.
We do not recommend the PB4RO to be used with water in excess of 10 gpg
(171 mg/L) hardness, unless the water is softened prior to the reverse
osmosis
system.
†
See your local dealer or water treatment specialist to reduce these substances
in your water.
PB4RO-75 Dimensions:
System Dimensions 13" H x 15" W x 4.75" Dia
(330 x 381 x 120.6 mm)
Tank Dimensions 14.5" H x 11" Dia
(368 x 279 mm)
System Weight 23 lbs (10.4 kg)
Tank Capacity 3.2 gal (12.1 L)
PW-S2500R Cartridge Yellow
PW-C5000R Cartridge Blue
PW-RO75R Cartridge Green
PW-C2500R Cartridge Violet
rain Saddle Valve
Water Supply Adapter
uick-connect Fitting
torage Tank
aucet Adapter
hange Indication Sticker
/4" Plastic Tubing
white, red and green)
247146 Rev D JA12