XS Temp74 PT100 Vio, Instruction Manual

Page: 9 / 19

8
UM Temp74 PT100 Vio EN rev.1 19.05.2023
•
Key Functions
Key Pressure Function
Brief Press to switch the device on or off
Brief
In measurement mode, press to enter Setup.
In the Setup menus, press to select the desired programme and/or value
Brief Activating and deactivating the MAX/MIN recording function
Long Activation and deactivation of the HOLD function.
Brief
Scroll through the measurement channel screens (CH 1-2-3-4-multiview).
Only channels to which a probe is connected are displayed.
Within the Setup menu, press to return to measurement mode
Brief
Used to scroll through and change parameter values in the Setup menu.
Manual - automatic data logger activation/deactivation
Brief
Used to scroll through and change parameter values in the Setup menu.
Recalling saved data
IMPORTANT:
•
When Sleep mode is active (by default after two minutes of non-use of the instrument) press any key to
reactivate the display brightness.
•
Only at this point do the buttons regain their function.
•
LED
All instruments are equipped with a two-colour LED (red and green) that provides the user with important
information on the status of the system:
Function LED Description
Ignition GREEN Fixed
Shutdown RED Fixed
Instrument in Standby GREEN Flashing every 20 s
Stable size GREEN Flashing every 3 s
Error during measurement RED Flashing every 3 s
Confirmation of a selection / DataLogger (data storage) GREEN On for 1 s
Recalling saved data GREEN/RED 0.5 seconds green and 0.5 seconds red
Installation
•
Supplied Components
The instrument is always supplied in its own carrying case.
Inside the case there is always: instrument with batteries, user manual, connection cable and power supply.
•
Commissioning
•
The device leaves the factory ready for use by the user.
•
Batteries are already included.
•
Switching on and off
Switch the system on by pressing the button.
They will be displayed:
•
device model and software;
•
offset of the 4 channels;
•
temperature measurement screen;
•
to switch off the instrument, press the button in measurement mode.