14
UM Temp74 PT100 Vio EN rev.1 19.05.2023
•
Screen Settings
This menu contains the display configurations:
Colour Theme
You can select Light Theme or Dark Theme, depending on your personal preferences or conditions of use.
Standby
Access this Setup menu to select whether and after how long to activate the device's power-saving mode.
•
OFF: Mode deactivated.
•
30 sec, 1,2,5 MIN: The instrument enters standby mode if no key is pressed for the set time.
When the device is in standby mode, the brightness of the display is reduced to a minimum, which saves
significantly on battery consumption.
Note
: To exit
standby
mode and return the display to normal brightness, press ANY button. Once the
display brightness is restored, the buttons regain their function (section 'Button Functions').
Backlighting
Access this Setup menu to adapt the visibility of the display to the environment:
•
INDOOR (In) - Recommended when using the device indoors;
•
OUTDOOR (Out) - Recommended if using the device outdoors;
•
AUTO - Factory setting. Thanks to the brightness sensor, the display automatically adapts to the ambient
conditions. This mode also guarantees a longer battery life.
Brightness
Access this Setup menu to choose between three different display brightness levels:
•
Low
•
Normal
•
High
Note
: Keeping the display at high brightness at all times negatively affects battery life.
•
Date and time
Access this setup menu to update the date and time of the device. Use
to change the time, confirm with
and repeat the same operation for minutes, day, month and year.
•
Units of Measurement
Access this setup menu to select the desired unit of measurement, ° Celsius or ° Fahrenheit.
Important
: by setting a different unit of measurement, the offset will also be converted to the new unit of
measurement. The offset correction is also visible when the instrument is switched on
.
•
Language
Access this setup menu to select the language of the instrument from the 5 selectable languages:
•
Italian, English, French, German and Spanish.
•
Auto-off
Access this Setup menu to activate or deactivate the instrument's auto switch-off.
•
No
:
The instrument always remains switched on.
•
Yes
:
The instrument switches off automatically after 20 minutes of inactivity.
Note
: With an automatic or programmed data-logger set, the auto-off is automatically deactivated
.
•
Sound
Access this menu to set whether the sound should always be on (every time a button is pressed), always off or
only activate when the instrument detects an alarm.
