13
UM Termometri serie 7Vio ENG rev.0 14.04.2021
The table below shows the structure of the Setup menu for the parameter, for each programme the options
that the user can choose and the default value are listed:
Menù Settings Composition
Program
Description
Options
Factory Default settings
P9.1
TEMPERATURE UNIT
°C - °F
°C
P9.3
BACKLIGHT MODE
INDOOR / OUTDOOR
INDOOR
P9.4
BRIGHTNESS
LOW / NOR / HIGH
NOR
P9.5
SLEEP MODE
2 MIN / 5 MIN / OFF
2 MIN
P9.8
RESET SETTINGS
YES / NO
NO
P9.9
AUTO OFF
YES / NO
YES
P9.1 Temperature unit
Access this Setup to set the unit of temperature measurement (°C - °F).
Note
: By setting a different unit of measurement, the offset will also be converted to the new unit
of measurement. Offset correction is visible when the instrument is switched on.
P9.3 Backlight mode
Access this setup menu to select the contrast mode to use for the display backlight:
•
INDOOR (In)
– Default option - Recommended if you use the device indoors;
•
OUTDOOR (Out)
– Recommended if you use the device outdoors.
P9.4 Brightness
Access this setup menu to choose between three different levels of display brightness:
•
LOW
– low;
•
NORMAL
– medium;
•
HIGH
– high.
Note
: Keeping the display bright always adversely affects battery life.
P9.5 Sleep mode
Access this setup menu to select whether and after how long activating the device Sleep mode.
•
OFF
: Sleep mode off;
•
2 MIN
: The instrument enters Sleep mode if no key is pressed for 2 minutes;
•
5 MIN
: The instrument enters Sleep mode if no key is pressed for 5 minutes.
When the device is in Sleep mode, the brightness of the display is reduced to a minimum, significantly saving
battery consumption.
Note
: To exit from the Sleep mode and return the display to normal brightness, press ANY button.
Once the display brightness is activated, the buttons reacquire their function (paragraph "Key
function").
P9.8 Reset settings
Access this setup menu to restore the instrument to factory conditions, as referred to the above chart.
P9.9 Auto-off
Access this setup menu to activate or deactivate the auto-shutdown of the instrument.
•
YES:
The instrument automatically turns off after
20 minutes
of inactivity;
•
NO:
The instrument remains always on, even if you are not using it.
IMPORTANT
: The correct and systematic use of parameters P9.3 / P9.4 / P9.5 / P9.9 allows to significantly
lenghten battery life.
