9
UM Termometri serie 7Vio ENG rev.0 14.04.2021
•
Instrument transportation
The instrument is always supplied with the appropriate carrying case. Use the original case only, to transport
the instrument. If you need to buy it again, contact your local distributor.
The interior of the case is shaped to be able to house the instrument and the sensors still connected.
•
Keys Function
Key
Press
Function
Short
Press to turn the device on or off
Short
In measure mode, press to enter the setup.
In the setup menus, press to select the desired program and / or value
Short
In setup mode, press to go back to measurement mode
Short
MAX/MIN memory activation, MAX value display and MIN value display.
It is used to scroll and change the parameters of the Setup menu
Long-Press
(3 sec)
3 seconds pressure to turn off MAX/MIN recording
Short
Activation and deactivation of HOLD function.
It is used to scroll and change the parameters of the Setup menu
IMPORTANT
:
•
When the Sleep mode is active (by default after two minutes of inactivity of the instrument)
press any key to reactivate the brightness of the display.
•
Only at this point do the keys regain their function.
•
Input / Output
Connection
Use only original accessories and guaranteed by the manufacturer.
Contact your local distributor for further support.
Temp7 PT100 Vio upper panel
SINGLE 3 PIN CONNECTOR
for temperature probe
PT100
