17
902305
SH M3x5
902306
SH M3x6
303129
SHIM 3x6x2
303128-K
SHIM 3x6x6
903306
SFH M3x6
CHASSIS FLEX SETTING
TOP DECK SETTING
H = Hitec
F = Futaba, Robe
K = KO, JR, Airtronics, Sanwa
For more in-corner steering and better steering response, aluminum servo horns may be used.
IMPORTANT!
When the aluminum horn is used, the steering servo saver is not used. This increases the risk of breaking the servo in serious crashes.
Optional alu top deck mount improves forward
and rear traction and makes the car more
stable and easier to drive under low-traction
conditions, however generates more on-power
push. Recommended for low and medium
traction conditions.
When the aluminum top deck mount is used,
the screws from layshaft bulkheads and M3 nut
from motor holder must be removed.
OPTIONAL:
#302570
Graphite Steering Plate Set
Smart chassis flex adjustment via graphite steering
plate which can be mounted with an additional
aluminum stand. Using only the graphite steering
plate, chassis flex is medium; using the aluminum
stand for reinforcement, the flex becomes stiffer.
Stiffer flex results in more aggressive handling and
increased steering.
INITIAL SETTING
3x6x2
3x6x6
3x6x2
8 mm thread
10 mm thread
HUDY ALU SERVO HORNS
#293491 KO, JR, Sanwa, Airtr. - OFFSET - 23T
#293492 Hitec - OFFSET - 24T
#293493 Futaba - OFFSET - 25T
#293501 KO, JR, Sanwa, Airtronics - 23T
#293502 Hitec - 24T
#293503 Futaba - 25T
OPTIONAL:
#301196
T4 Graphite Upper Deck 1.6mm - V2
We recommend using optional 1.6mm top deck for super-low traction conditions as it
provides more overall traction and steering.
OPTIONAL:
#306516-O
T4 Alu Top Deck Mount - Orange
4. STEERING
Summary of Contents for T4
Page 1: ......