15
903306
SFH M3x6
303129
SHIM 3x6x1
TOE-IN
TRACK-WIDTH
WHEELBASE
ROLL CENTER
ANTI-DIVE
KICK-UP
All possible mounting
alternatives of eccentric bushings
3x6x1mm
3x6x1mm
ECCENTRIC BUSHINGS HAVE TWO DIFFERENT OFFSETS FROM THE CENTER.
Middle position = 0.5 mm or 0.5° from center
Outer position = 1mm or 1° from center
The new Xray front alu lower suspension holders provide even greater range of
adjustment for the front suspension. Using different combinations of eccentric
bushings, fine adjustment of front anti-squat, front kick-up, front toe-in, front roll
center, and front track-width can be obtained. For more information about the
influence of front anti-dive, front kick-up, front toe-in, front roll center and front
track-width on car handling, please refer to HUDY Set-up Book (#209100).
Marked
“FF”
Composite eccentric bushings
INITIAL POSITION
1
1
0.5
0.5
0
COMPOSITE ECCENTRIC BUSHINGS
INITIAL POSITION
1
1
0.5
0.5
0
3. FRONT & REAR SUSPENSION
It is extremely important that the arms
move freely on the pivot pins. If they
do not, use the #107633 HUDY Arm
Reamer to slightly resize the holes in
the arms.
44.3 mm
2x 1:1
Summary of Contents for T4
Page 1: ......