Xray T4, Instruction Manual, Page: 12 / 36

12
BAG
03
OPTIONAL
2x 2x 2x
For better stability and to make the car easier to drive, optional #302190 and #303190 graphite stiffeners may be used. Using only 4 screws, the graphite stiffener can be installed or removed
which would completely change the characteristics of the car. Stiffeners may be used independently at front and/or rear. IMPORTANT! Install/remove stiffeners equally on left & right sides.
2.5x6
2.5x6
#30 2190
GRAPHITE FRONT LOWER ARM PLATE 1.6MM (2)
#30 3190
GRAPHITE REAR LOWER ARM PLATE 1.6MM (2)
#30 3192
ARS GRAPHITE REAR LOWER ARM PLATE 1.6MM (2)
2.5x6
STANDARD REAR SUSPENSION ACTIVE REAR SUSPENSION™
FOR ALTERNATIVE SETTING
ACTIVE REAR SUSPENSION™
BAG
3. FRONT & REAR SUSPENSION
30 2168 FRONT SUSPENSION ARM - HARD - 1-HOLE
30 2169 FRONT SUSPENSION ARM - GRAPHITE - 1-HOLE (OPTION)
30 2190 GRAPHITE FRONT LOWER ARM PLATE 1.6MM (2) (OPTION)
30 2710-O ALU FRONT LOWER 1-PIECE SUSPENSION HOLDER - FRONT - FF
30 2720-O ALU FRONT LOWER 1-PIECE SUSPENSION HOLDER - REAR - FR
30 3129 COMPOSITE SET OF WHEELBASE SHIMS (3x1MM; 1x2MM) (2)
30 3168 REAR SUSPENSION ARM - HARD - 1-HOLE
30 3169 REAR SUSPENSION ARM - GRAPHITE - 1-HOLE (OPTION)
30 3170 ARS - ACTIVE REAR SUSPENSION ARM - HARD - 1-HOLE
30 3171 ARS - ACTIVE REAR SUSPENSION ARM - GRAPHITE - 1-HOLE (OPTION)
30 3190 GRAPHITE REAR LOWER ARM PLATE 1.6MM (2) (OPTION)
30 3192 ARS GRAPHITE REAR LOWER ARM PLATE 1.6MM (2) (OPTION)
30 3710-O ALU LOWER 2-PIECE SUSPENSION HOLDER
30 3711-O ALU REAR LOWER 1-PIECE SUSPENSION HOLDER - FRONT - RF (OPTION)
30 3720-O ALU REAR LOWER 1-PIECE SUSPENSION HOLDER - REAR - RR
30 7216 SUSPENSION PIVOT PIN (2)
36 2315 ECCENTRIC BUSHING SET (2)
90 1308 HEX SCREW SB M3x8 (10)
90 1310 HEX SCREW SB M3x10 (10)
90 1408 HEX SCREW SB M4x8 (10)
90 3306 HEX SCREW SFH M3x6 (10)
362315
362315
303129
303129
901310
303168
303720-O
303129
303129
901408
901408
903306
307216
362315
307216
302168
302720-O
901308
903306
362315
302710-O
303710-O
303170