XPS Concrete Genie Manual Download Page 7

5

Xtreme Hard Densifier

Number 1 Brand for Hardening, Protecting & Cleaning Concrete Floors

Xtreme Hard is a highly reactive Colloidal Silica-based densifying agent. The Colloidal Silica molecule has more reactive sites, so it goes 
to work quickly, within 1-2 minutes. Spray it on the concrete until the surface is saturated, then agitate with a soft bristle broom. Wait until 
dry (45-60mins). Xtreme Hard is a green, clean and safe material. Its low pH formula (pH approx 8.7, only slightly higher than baking soda) 
is safer for you to handle. Xtreme Hard emits no Volatile Organic Compounds (VOCs) and eliminates the hazardous-material dispos-
al,  so  it’s  better  for  the  job  site  and  friendlier  to  the  planet.  Xtreme  Hard  is  shipped  as  a  concentrate.  One  gallon  of  concentrate  makes  five 
gallons  of  ready-to-use  product.  Xtreme  Hard  is  the  lowest  cost  densifier  per  square  foot.  New  Improved  Nano  Technology  Formula,
penetrates deeper into the concrete. (Mix 1 part Hard to 4 parts potable water) 

*Up-graded ~ XPS Magnetic Plates Installed

Attaching Grinding & Polishing Tools to Genie Magnetic Plates

1. 

Round Metals & Traps easily snap in place and stay locked due to magnets

2. 

To remove use a thin blade flat screwdriver place in slot between segment and plate and push outward.

Attaching Diamond Polishing Pads, Velcro Backed

1. 

Snap Velcro backed spacers (Hockey Pucks) onto plates, magnets hold in place

2. 

Attach Velcro backed diamond resin pads on top of spacer. The Velcro locks the pads in place. To change simply peal off old pad and 
place new pad on spacer.

Adapter Hockey Puck

For Attaching Pads & Resins

Tools on magnetic plate, simply snap on,and snap off

All Concrete Genies equipped with 

MorFlex couplers for even floor grinding

XPS Magnetic Plates

For Quick Tool Changes

From Slabs to Malls, it works for all.

• 

Offices

• 

Schools

• 

Factories

• 

Residences

• 

Warehouses

• 

Shopping Malls

Easy to Apply On Concrete Floors:

• 

Low Maintenance 

• 

Fortifies Concrete Floors

• 

Stops Dusting

• 

Reduces Energy Cost

• 

Wear Resistance

• 

Improves Traction

• 

Eliminates Mold

• 

LEED Compliant

Coverage: 400-600 square feet per gallon of working solution.

Xtreme Polishing Systems

Summary of Contents for Concrete Genie















Reviews: