XPS Concrete Genie, Manual

Page: 5 / 14

3
Parameter Description Function, Scope Original Data
E-01 Control
way
0. Keyboard Control
1. Terminal Control
2. RS485 COM Port Control
0
E-02
Frequency
given
selection 0. Keyboard Number Setting
1. Keyboard Potentiometer
2. Voltage signal or terminal VS1
1
E-13 Speedup Time 0.1-6500.0 second 30
E-18
Rotation
Speed
0.1% - 25% 3
E-64
Parameter
format
0. Without operation
1. Restore original setting
2. Remove malfunction recording
0
Setting Data
1
2
20
Concrete 12-15
Marble 10-12
Granite 8-10
E-34 Stop
Mode
0. Deceleration stop motor
1. Stop motor at once
0 1
E-63
Parameter
change
protection
0. All parameters changeable
1. Keyboard number settings changeable
2. All parameters prohibit changeable
0 2
Parameter Input Reset ting
1. Unlock firstly, resume original setting
Press PRG, press “<<” key, adjust to E-64 on the first line of LED screen, press SET key,
adjust to 1 (restore Original Setting), press SET key again.
2. Press “<<” key, adjust to E-63, press SET key, the second line of LED screen flashing,
adjust to 0 (all parameter can be changeable), press SET key again.
3. The first line of LED screen shows E-63, press “<<” key, adjust to E-34, press SET key
again, the second line of LED screen flashing, adjust to 1, press SET key again.
4. The first line of LED screen shows E-34, press “<<” key, adjust to E-18, press SET key
again, the second line of LED screen flashing, adjust to 12-15 for concrete, 10-12 for
marble, 8-10 for granite, press SET key again.
5. The first line of LED screen shows E-18, press “<<” key, adjust to E-02, press SET key,
the second line of LED screen flashing, adjust to 2, press SET key again.
6. The first line of LED screen shows E-02, press “<<” key. adjust to E-01, press SET key,
the second line of LED screen flashing, adjust to 1 (Terminal control such as buttons),
change number to 0 (control panel keyboard control), press SET key again.
Function Code Form
Inverter Programming A 2T-2
Note: If terminal buttons are broken, change number to 0 and the machine can be operated by control panel keyboard.
Manual - Concrete Genie