XPRESSFILL Systems LLC
|
4
265 Prado Road, Suite 1 • San Luis Obispo, CA 93401 • Tel: (805) 541-0100 • [email protected]
Air:
30 psi recommended
CO2:
30 psi recommended
Warning:
Please follow the recommended
settings of the equipment you are using.
Exceeding manufacturer recommended
settings may result in injury to self and
others, as well as damage and/or failure
of the machine.
Figure 2
Air Compressor
1.
CO2 Tank
2.
CO2 Regulator
3.
CO2 Line to Keg Inlet
4.
Pressurized Keg
5.
Line to “Inlet” input on Filler
6.
CO2 line to “CO2 input on Filler
7.
Compressed are line to “Air” input on Filler
8.
3
Setting Up Your Filler and Filling
Your First Bottle
The maximum recommended operating pressure
for the CO2 and air compressor are listed to the
right. Please keep in mind that varying
temperatures and product properties will mean
that adjusting the pressures will be necessary
for your product. You are encouraged to adjust
these pressures carefully until you find a
combination that works for your product and
bottling environment.
