https://www.XPOtool.com
Item 50919–50921
Page 3
The Tool Experts
08 2022-1
Introduction
Thank you for purchasing this quality product.
To minimise the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Features
•
Pump body, pump cover and impeller are made of high-quality plastic
•
Big outlet, high lift, low noise
•
Good mechanical seal and durable.
•
With over load protection to ensure long lasting working
•
With simple suction and discharge pipes.
Application
These water pumps are designed for the circulation and filtration of the small swimming pools (family
use), whirl pools and Sauna pools.
Caution!
•
For swimming pools and garden ponds and in its protection zone, the use of the pump is only
permitted with fault current circuit breaker (30
mA) according to DIN VDE 100 part 702 06.92.
Please contact a qualified electrician if you have any questions.
•
Keep a safe distance to the pool and fix the pump on a stable base plate. According to VDE
standard is observed a safety distance of 2
m.
•
The pump has a built-in motor protection switch. We do not take over any liability for losses
through unsuitable use or faulty assembly. The power cable must conform to EC standards (2)
or the type H07 RN-F according to VDE 0620.
Checks before start-up
1.
Make sure that the voltage and frequency of power supply and pump (see nameplate) are suit-
able.
2.
Make sure that the pump shaft may rotate freely.
3.
Fill the pump with water to make sure that the pump body, filter basket, pipes and other con-
nectors are not leaking. Tighten or loose the screws with hands, or tolls if necessary.
4.
Open any existing valves in pressure and suction lines and check that all hoses are connected.
5.
Please fill the suction pipe and the pump body completely with water.
6.
The pump is suitable for clean water with a temperature of max. 35
℃
.
Power supply
Use the pump only on a three-pole socket with 230
V/50
Hz.
