https://www.XPOtool.com
Item 62982
Page 3
The Tool Experts
02 2022-1
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Safety instructions
•
During work, wear appropriate protective equipment.
•
Only use the device according to the intended use defined in this manual. Any improper use
can lead to material damage and personal injury.
•
Do not modify the device and only use original spare parts.
•
Only use the device in a well-lit and tidy zone. A cluttered and poorly lit workplace increases the
risk of accidents.
•
Keep children away from the device to make sure that they do not play with it.
•
Do not use the device if it has damaged parts.
Parts list
Name
Quantity
Size
Rivet nut pliers
1
328
mm
Flat wrench
1
–
Bits
5
M5/M6/M8/M10/M12
Bolts
5
M5/M6/M8/M10/M12
Rivet nuts
150
30 × M5/M6/M8/M10/M12
Removing a bolt
1.
Unscrew the plastic screw.
2.
Remove the end nut from the bolt.
3.
Remove the upper nut (nose nut).
4.
Pull out the bolt at the top.
5.
Remove the small spring from the bolt.
Attaching a bolt
1.
Attach the small spring to the correct place of the bolt.
2.
Insert the bolt into the upper bushing until only the end of it is sticking out.
3.
Screw the nut (nose nut) into the bushing at the top.
4.
Screw the end nut into the end of the bolt.
5.
Set the end of the bolt into the hole of the nut, then press the bolt down.
Use
1.
Choose a rivet nut of the desired size and place its end onto the bolt.
2.
Hold the rivet nut and turn the lower plastic screw clockwise. Thus, the bolt is inserted into the
rivet nut.
