TREADMILL FOLDING
1,Before moving the treadmill ,you should make sure base frame is at its lowest
point ,switch off ,and power plug out of the socket .
2,You can lift up the treadmill end with two hands to forward or backward to
upright place.
3, Check adjustable red pipe whether work well as the drawing shows below .
4, Put down the running board with two hands and stamp on the red pipe to lower
down .
TREADMILL MOVEMENT
Before moving the treadmill ,you should the power off and power plug out of the
socket and then treadmill is folded .
Then ,grasp the running board end with one hand ,and hand bar on the same
side with other hand ,incline towards the chest 30°~40° to move it slowly .
33
Summary of Contents for B-PRO 6.2
