Xplore B-PRO 6.2, Owner'S Manual

Page: 41 / 53

c) Press “START” key when running, it will pause. Press “START” key again, it
will running, the record data will keep on.
1.5: Press “STOP” key when running, the treadmill will slowly till stop. All will
return to the default state.
1.6: In any state, pull-out safety locks, window displays: E7and sound buzzer.
The treadmill stop.
1.7: The controller always under the inspection. Treadmill will stop once the
abnormal case happen. Window will show the ERR message and sound.
BODY FAT FUNCTION (Optional)
When the treadmill is stopped, press the "PROG"key until select” FAT "and enter
into body fat function, then press “MODE” key to set the parameter. You can also
check “Distance” and “Time by “
ˇ
”,
Āüā
Key.
z
F1 means Sex, the 1(male), 2(female). Default Value as 1.
z
F2 means Age, the range is 1-99, and the default value as 25.
z
F3, means Height, the range is 100-220CM(39-87inch), the default value as
170CM(67inch)
z
F4, means Weight, the range is 20-150KG(44-330pound), the default value
as 70KG (154pound)
z
F5, mean BMI, show you have finished the set item , and enter into body fat
function. Put two hands on the handle bar, wait for 8 seconds, and the
window will show the BMI. Take the Asian people for example and the data
below is for reference only .
BMI under 18 is under weight;
BMI Between 18 and 24 is normal weight;
BMI Between 25 and 28 is over weight;
BMI And over 29 is obesity.
26