XPLORE TECHNOLOGIES GeneSys, User Manual

Page: 28 / 48

October 2001 Page 28 P/N 96-000001-017, Version Q301
How to Run the Setup Utility
NOTE: You must have a keyboard attached to the GeneSys in order to enter the Setup Utility.
1. Turn on the computer.
2. When
Press <F2> to enter SETUP appears, press F2 to display the Setup Utility screen.
3. Change the desired settings.
4. Press
ESC to get back to the main Setup Utility screen then use arrow keys to select the Exit
menu.
5. Select one of the following exit methods, then press Enter
•
Save and Exit
•
Exit (No Save)
•
Default Settings
•
Restore Settings
•
Version Info
6. When Save and Exit or Exit (No Save) is chosen then the system will reboot
Using the Setup Utility
The following keys are used to maneuver among the Setup options and to change values:
Cursor Keys (arrow keys)
Use the cursor keys to move from one option to another.
Spacebar key
Press the Space key to increase the numeric value or change the next value of an
option.
ESC key
Press this key to enter the Exit menu. From the Exit menu, you can make default
settings or load previous values and so on.
Or you can use the build-in PS/2 mouse to move around and select options.