NB These symbols on your device mean:
• This appliance is filled with Propane gas R290. Follow strictly the manufacturer’s instruction concerning
use and repairs!
• Before using this appliance, you must carefully read the entire instruction manual.
• Do not install, operate or store the device in a room with a floor area smaller than 7m
2
for 16L/20L
models.
• Repairs must be performed based on the recommendations from the manufacturing company.
SPECIFIC SAFETY NOTES RELATING TO REFRIGERANT R290:
• ENVIRONMENTAL INFORMATION: This unit contains fluorinated greenhouse gas covered by the
Kyoto Protocol.
• This appliance contains the refrigerant R290.
• R290 is a refrigerant that complies with European ecological standards; nevertheless, it is recommended
not to pierce the cooling circuit of the machine. At the end of its useful life, deliver the appliance to a
special waste collection centre for disposal.
• GWP (Global Warming Potential) R290 = 3.
• If the appliance is installed, operated or stored in a non-ventilated area, the room must be designed to
prevent the accumulation of refrigerant leaks resulting in a risk of fire or explosion due to ignition of the
refrigerant caused by electric heaters, stoves, or other sources of ignition.
• When defrosting and cleaning the appliance, do not use any tools other than those recommended by the
manufacturing company.
• The appliance must be placed in an area without any continuous sources of ignition (for example:
open flames, gas or electrical appliances in operation).
• Do not pierce or burn any of the components of the cooling circuit of the unit.
Do not set light to the unit.
• The appliance must be stored in such a way as to prevent mechanical failure or damage.
• Appliance must be installed, operated and stored in a room with a floor area larger than 4m
2
for 10L/12L
models, Approximate room size 2m x 2m, and 7m
2
for 14L models. Approximate room size 2.6m x 2.6m.
• Be aware that the refrigerant gases may be odourless, which means you cannot smell leaks.
• Compliance with national gas regulations must be observed.
• Individuals who operate or work on the refrigerant circuit must have the appropriate certification issued
by an accredited organisation that ensures competence in handling refrigerants according to a specific
evaluation recognised by national associations in the industry.
• Maintenance and repairs that require the assistance of other qualified personnel must be performed
under the supervision of an individual specifically qualified in the use of flammable refrigerants.
Keep ventilation openings clear of obstruction.
2
