Xpelair Xcell 400 QV, Installation And Operating Instructions Manual

Page: 30 / 43

30
8.5.3 Control panel – summer bypass temperature (settings menu)
The sequence below describes how to modify the Summer Bypass temperatures within the „Settings Menu‟ on the
Control Panel. The default factory setting is 24ºC.
Settings
Esc. Enter
Bypass
+24 C
Follow the instructions above to display the Settings Menu on the Control Panel.
Press the Enter button (S2) briefly.
„Bypass temperature 24ºC‟ appears in the display.
Press the Enter button (S2) briefly again.
The bypass temperature now flashes in the display.
By pressing S1 or S2, the bypass temperature can be changed between 18ºC and 26ºC.
The selected bypass temperature can be saved by pressing the Enter button (S2).
Exit the settings menu by pressing ESC (S1) twice
Note - when no settings are altered for a period of 120 seconds, the display switches automatically to normal
operation
8.5.4 Control panel – filter cleaning or replacement reminder (settings menu)
The sequence below describes how to modify the time period between reminders to clean or replace the MVHR
Filters. The default factory setting is 6 months.
Settings
Esc. Enter
Filter time
6 months
Follow the instructions above to display the Settings Menu on the Control Panel.
Press the arrow button (S3) briefly.
„Filter time 6 months‟ appears in the display.
Press the Enter button (S2) briefly again.
The filter time now flashes in the display.
By pressing S1 or S2, the filter time can now be changed between 2 and 6 months.
The selected filter time can be saved by pressing the Enter button (S2).
Exit the settings menu by pressing ESC (S1) twice.
Note - when no settings are altered for a period of 120 seconds, the display switches automatically to normal
operation