Xpelair Xcell 400 QV, Installation And Operating Instructions Manual

Page: 13 / 43

13
6.3 Air flow settings (Xcell 400 QVI model only)
Air flow rates can be changed by a qualified service technician using the control panel shown below. The supply air
Fan speed can be modified independently from the exhaust air Fan speed, between 150-400 m³/h in the „Customer
Settings‟ menu. See the Service Manual for further details.
6.4 Factory speed settings (All Xcell 400 models)
Speed 1: 150 m³/h - Low speed - preferably at night or during periods of absence
Speed 2: 240 m³/h - Normal daytime operation
Speed 3: 400 m³/h - Boost setting for increased air exchange
Note:
When the MVHR is being used with a Manual 2-Speed Switch (Xcell 400 QV model only); only speeds 2 and 3 will
apply.
6.5 Technical data
Technical data Units Specification
Voltage / Frequency V / Hz ~ 220-240V / 50-60 Hz
Max. current consumption A 2.0
Power consumption - Speeds 1, 2, 3 W 35/85/190
Air flow rate - Speeds 1, 2, 3 m³/h 150/250/350
Air flow rate at 100 Pa Static Pressure m³/h 410
Protection category IP 20
Max. ambient temperature °C 50
Dimensions (without ducting) - W x H x D mm 750 x 725 x 469
Weight of MVHR Kg 34
Duct connections mm 150
Condensate drain tube connections mm 20
Filter class - G4
Efficiency of Heat Exchanger % Up to 91%
Sound pressure level (measured at a distance of 3m) - Speeds 1, 2, 3
dB (A) 29/34/44