Xoro HRT 8400, User Manual

Page: 12 / 37

HRT8400
13
E
n
g
lis
h
Connection
General information
•
Assure that the device is switched off and unplugged.
•
Read the manual of your TV and attend to the safety instructions.
•
Connect the power cable at last with a electronic socket.
Connecting a TV
The receiver could be connected either through HDMI or AV RCA to TV. Please connect the receiver
through HDMI if possible. The TV could only display the signal in high definition quality through HDMI
out put.
Notes:
•
The HRT8400 is designed for TV with 16:9 as aspect ratio. Please refer to page 27 to adjust
aspect Ratio for 4:3 TV.
•
Please employ high quality cables. Low quality cables ( especially up 1,5 m length) might
cause picture failure or make an image transmission impossible. Poorly shielded cables might
result in “double image” or disturbing sound.
•
By using the loop through you can connect a second receiver.
Connecting a network
Connect one end of the network cable to the RJ45 LAN socket of the player and the other to the RJ45
LAN port of your router, switch or hub devices.
Connecting a Hi-Fi System
A coaxial or a optical fiber cable is necessary for the S/PDIF signals for the digital connection to a Hi-
Fi system. This cable is not included in the delivery of this receiver. Connect the S/PDIF out put with
the S/PDIF input of your Hi– Fi system. Please refer to the manual of the Hi-Fi system to select the
audio input.
Notes:
The receiver could out put digital signals in PCM-(stereo) or AC3– Bitstream (Dolby Digital). If your
Hi-Fi system provides no sound for programs with Dolby Digital sound track, please refer to page 27
to change the out put format of the S/P DIF out put.
Connecting a USB storage
It takes the receiver under circumstances some time to recognize the USB and get ready for further
operation.
Please remove the USB storage only after all recording or playback processes are completed.
Following file systems will be supported:
•
File system: FAT 16, FAT32, NTFS,EXT3
Notes:
•
There are a variety of USB storages on the markt. Not all of them conform the specification of
USB storage. If your USB storage could not be read by the receiver, please try another USB
storage.
•
If a USB device could not be read any more, please carry out a data storage medium analysis
with your computer or format the storage again.
•
USB storages requiring higher electric current than 500mA (0,5A) do not conform the specifi-
cation of USB storage. These USB storage could possibly not work smoothly together with
this receiver.
•
Please always save all data on the USB before connection to the receiver.
•
A sufficient writing– and reading speed of the USB storage is necessary for recording HD
programs or using the Time-Shift function. In case of problems in recording or Time-Shift,
please try a USB storage of higher writing– and reading speed.
Connection