ENG
19
Engl
ish
LNB Typ:
define the oscillator frequency for your LNB . Please take the correct value from the
manual of your LNB (standard:09750/10600)
If you have a Unicalbe/SCR EN50494, select LNB type Unicable (A or B, A is generally the correct
choice by a Unicable system for satellite reception). Choose a free channel (IF channel) and the
corresponding frequency. Please refer to the manual of your Unicable system. Ask your renter for
the free channel, if the connection is provided in the rental house.
LNB Voltage:
This parameter defines the voltage of the antenna, this voltage decides signal from
horizontal or vertical polarized transponder will be received. The setting will only have to be changed
in very rare cases. A false setting will result in missing program or no signal reception at all.
(standard:13/18V)
22KHz
:
The receiver can switch the LNB with 22 KHz signals for the reception of another
frequency band. The setting will only have to be changed in very rare cases. A false setting will re-
sult in missing program or no signal reception at all. (standard: Auto)
Toneburst:
Tone burst switcher has two input ports, enabling the connection of 2 antennas or
LNB to the receiver. If you have a Tone burst switcher, you will have to select one of the both con-
nections (A or B) for the satellite chosen on the left side.
DiSEqC:
DiSEqC switcher has up to 16 input ports enabling the connection of multiple anten-
nas or LNB to the receiver. If you have a DiSEqC switcher, you will have to select one of connec-
tions for the satellite chosen on the left side. Please check which version (1.0, 1.1) could be support-
ed in the manual of your switcher.
Motor:
Rotatable Antennas require extended configurations. We recommend professional
installation from a technician. Please set up according to your antenna. You can open further set up
windows with the
RED
and the
GREEN
button.
After the set up has been done for all reachable satellites, please press the
BLUE
button to open the
menu for channel scan.
Initial Installation
Dish Setup-explanation of the parameters