ENG
15
Engl
ish
Connection
Connect the cable of your satellite dish to the Antenna input LNB IN of the
Receiver.
Notes:
Screw the so-called F plug together with the LNB IN.
Please make sure to avoid short circuit at the F plug.
Employ only high quality antenna cables . Low quality antenna cables
might cause disturbance
A coaxial cable is necessary for the S/PDIF signals for the digital connection to a Hi-Fi system. This
cable is not included in the delivery of this receiver. Connect the S/PDIF out put with the S/PDIF
input of your Hi–Fi system. Please refer to the manual of the Hi-Fi system to select the audio input.
Notes:
The Receiver could output digital signals in PCM-(Stereo) or AC3-Bitstream. If your Hi-Fi system
provides no sound for programs with AC3 sound track, please refer to page 35 to change the out
put format of the S/PDIF out put.
The USB port is on the front side of the Receiver. It takes the receiver under circumstances some
time to recognize the USB and get ready for further operation.
Please remove the USB storage only after playback processes are completed.
Following USB devices will be supported:
USB storage
Max. capacity 2048B
File system: FAT32, NTFS
MBR-Partition Style
Notes:
There are a variety of USB storages on the market. Not all of them conform the specification
of USB storage. If your USB storage could not be read by the Receiver, please try another
USB storage.
If a USB device could not be read any more, please carry out a data storage medium analysis
with your computer or format the storage again.
USB storages requiring higher electric current than 500mA (0,5A) do not conform the specifi-
cation of USB storage. These USB storages could possibly not work smoothly together with
Receiver.
Please always save all data on the USB before connection to the Receiver.
If you need open Network Apps, please connect internet cable to LAN port.
Connection to satellite dish
Connecting to USB storage
Connection to a Hi- Fi system
Connecting to Internet
