U
SER
M
ANUAL
P
RODUCT DESCRIPTION
26
LAN host ports (G):
The Minilogger Z7 features four ports to connect to a switch or directly to a
PC. This is necessary to control the Minilogger Z7 via software and exchange
data.
General status LEDs (H):
These LEDs indicate the operating status of the Minilogger Z7.
LED
Meaning
Info
Minilogger Z7 is DHCP server
Service
Lights up constantly when the Minilogger Z7 is in firmware update
or recovery mode
Displays different error codes by flashing
Logging
Logging in progress
LED flashes as the logging stops, because the stopping process
may take longer depending on the queue fill level
Connect
Connection between Minilogger Z7 and X
ORAYA
Suite is established
Aux
Lights up constantly when one of the additional interfaces without
hardware slot (for example GNLog, Button) is activated
Flashes when messages are received
HDD
Flashes when accessing the storage medium
USB device port (I):
This port has currently no function for the user.
Status LEDs of the log interfaces (J):
A constantly lit status LED indicates an existing and activated log interface
on the corresponding slot. The LED flashes when messages are received.
For the MOST25 interface, a constantly lit LED means that the MOST ring is
closed and the interface is enabled.
Power/trigger/wake port (K):
By default, the Minilogger Z7 must be supplied with 12 V DC voltage.
Optionally, it can also operate with power supplies in a certain specified
range. (
Technical data)
Trigger input and trigger button offer an analogous operation. A +12 V
signal level at the trigger input is equivalent to pressing the trigger button.
(
Trigger/wake button)
