Touch Screen Operation
-12-
Briefly touch “ ” to decrease frequency
by one step of channel spacing.
Automatic Search
During Radio mode, touch and hold
(for more than 2 seconds ) either “ / ”
ICONS to start search for a radio station
automatically.
To tune in strong-signal FM
Station only (LO/DX function)
Press
button on the
remote control
to select
mode of Local and
Long-distance traffic news.
Storing and Listening to a
Memory Station
Setting Memory
With this system, a total of 30 stations
can be stored in the memory of six
buttons. Each band stores up to six
preset stations. The stations might be
FM1, FM2, FM3, AM1(MW1), and
AM2(MW2) band.
The operation is as below :
- Store in Memory
>
Select the frequency band
>
Select the station
>Press and the station until it show
the frequency band your select.
- Retrieve a preset station
Touch the
1-6
ranges briefly to retrieve
a station which had been stored in the
memory in advance the chose number
is shown on display .
In radio mode,
LOC
or tap icon
select LOC/DX
Selecting The Frequency Band
Touch the screen of
“ BAND ”
section
repeatedly to select the band , the
message will show in turn :
When an FM stereo broadcast
is hard to receive
Press
ST/MO
button on the remote
control to select the MONO or STEREO
mode .
Start Searching For a Station
Manual Search
During Radio mode, briefly touch “ ”
to increase frequency by one step of
channel spacing.
FM1 FM2 FM3
AM2(MW2)
AM1(MW1)
RADIO OPERATION
87.50
90.10
98.10
107.90
101.70
100.80
Listening to Radio
Touch the RADIO ICON in home menu
to enter the RADIO mode. In radio mode,
tap icon to adjust the brightness for
the display .
