x-Lab Dot Matrix Printer XDP-321 User's Manual
- 16 -
till the
ONLINE
LED blinks with a beep.
2. Hold the
TEAR
button down for about 3 seconds to switch the function of automatically feeding
paper to the tear off position
ON
or
OFF
.
2.2.6 Other Functions of the Panel
n
o
it
c
n
u
F
n
o
tt
u
B
POWER
Enter printer setting mode to change the printer default setting. Long
press on the
LOAD/EJECT
button in online mode, printer enters
menu setup mode.
LOAD/EJECT + POWER
Chinese self-test mode
LF/FF + POWER
Print pin test mode
TEAR + POWER
English self-test mode
TEAR + LF/FF + POWER
Hex dump mode
2.3 Paper Select Lever
Use the paper select lever to specify the printing mode of cut sheet or tractor paper. If you use cut
sheet to print, please pull the paper select lever to the cut sheet position; if you use tractor paper to
print, pull the paper select lever to the tractor paper position.
2.4 Paper Feed Knob
The paper feed knob is used to load or eject paper manually. In general, it’s better not to use it.
2.5 Gap Adjust Lever
Set the gap adjust lever to proper position according to the thickness of your printing materials. The
default setting is for standard office paper.
Figure 2.3 Paper select lever
Figure 2.5 Gap adjust lever
