5. Install the new DIMM module into the memory socket. The
DIMM will only fit in one orientation. Insert the DIMM at an angle of
approximately 30 degrees into the empty memory socket.
Then press it firmly so that the contact edge is driven into the
receiving socket.
6. Pivot the DIMM until the latches on both sides of the socket
snap into place.
Note:
Notice the notch on the DIMM. The notches should fit nicely with the
socket.
7. Put the Metal Cover back and tighten 2 Screw E’s. Put the
keyboard back to its original position. Make sure the edge of the
keyboard now resides under the spring-loaded latches.
8. Re-attached Screw D.
