7. Locate and remove 4 Screw C’s from the HDD module.
Remove the metal case.
8. Re-attach the metal cover to the new hard drive and tighten 4
Screw C’s.
9. Re-attach the HDD module to the HDD connector. And re-
attach 2 Screw B’s.
10. Put the System Device Cover back and re-attach 9 Screw
A’s.
Congratulations! You have now completed the hard drive
upgrade. When you boot up the PC, you may need to create a
primary HDD partition and reformat the new drive and re-install
O/S, drivers, and all the necessary applications.
Upgrading the System Memory
Many applications will generally run faster when the computer’s
dynamic memory capacity is increased. The computer provides two
DDR2 memory sockets. There is one located underneath the
System Device Cover and another one located underneath the
