manualshive.com logo in svg

Xirrus Wi-Fi Array XR4420, User Manual

The Xirrus Wi-Fi Array XR4420 offers exceptional wireless connectivity. To fully utilize its features and settings, a comprehensive User Manual is available for free download at manualshive.com. This manual ensures an effortless setup and optimization process, maximizing your Wi-Fi Array experience.

Share
Download
background image

Wireless Array

Viewing Status on the Wireless Array

105

You may sort the rows based on any column that has an active column header, 

indicated when the mouse pointer changes to the hand icon 

. Click 

Refresh

 to 

update the information at any time. Click 

Auto Refresh

 to instruct the Array to 

refresh this window automatically.

See Also

Filters

CDP Neighbors

This status-only window lists devices on the Array’s network that support the 
Cisco Discovery Protocol (CDP). 

Figure 58. CDP Neighbors

The Array performs discovery on the network on an ongoing basis. This list 
shows the devices that have been discovered — Cisco devices and other devices 
on the network that have CDP running. For each, it shows the device’s host name, 
IP address, manufacturer and model name, the device interface that is connected 
to the network (i.e., the port that was discovered), and the network capabilities of 
the device (switch, router, supported protocols, etc.). 

CDP must be enabled on the Array in order to gather and display this 
information. For details and some restrictions, see “CDP Settings” on page 168.

Summary of Contents for Wi-Fi Array XR4420









































































































































































































Reviews:

No comments

Related manuals for Wi-Fi Array XR4420

Gamewell E3 Series Manual preview
E3 Series
Brand: Gamewell Pages: 21
E2S D2xC2LD2 Series Instructions/Service Manual preview
D2xC2LD2 Series
Brand: E2S Pages: 13
E2S D2xC1 Instruction Manual preview
D2xC1
Brand: E2S Pages: 14
Eagle Copters P139-HD Troubleshooting Manual preview
P139-HD
Brand: Eagle Copters Pages: 11
Zamel BIM-BAM GNT-921 Manual preview
BIM-BAM GNT-921
Brand: Zamel Pages: 6
T+A CARUSO BLU Firmware Update preview
CARUSO BLU
Brand: T+A Pages: 2
Valcom V-2924A Specification Sheet preview
V-2924A
Brand: Valcom Pages: 4
Displays2go LECTFACVFC Assembly Instructions preview
LECTFACVFC
Brand: Displays2go Pages: 3
Jefferson JEFMIG185-A User Manual preview
JEFMIG185-A
Brand: Jefferson Pages: 24
TOKK TOK-00336 Instruction Manual preview
TOK-00336
Brand: TOKK Pages: 4
Jensen Mobile Multimedia AM/FM/DVD Receiver VM9311 Instruction Manual preview
Mobile Multimedia AM/FM/DVD Receiver VM9311
Brand: Jensen Pages: 90
WILSON AUDIO Alexia Series 2 Installation And Care Manual preview
Alexia Series 2
Brand: WILSON AUDIO Pages: 60
Gato Audio FM-30 User Manual preview
FM-30
Brand: Gato Audio Pages: 12
ubbink Ubiflux W400 + Installation Regulations preview
Ubiflux W400 +
Brand: ubbink Pages: 61
Magnat Audio Sounddeck 150 Installation Notes preview
Sounddeck 150
Brand: Magnat Audio Pages: 40
Fenton SPB Series Instruction Manual preview
SPB Series
Brand: Fenton Pages: 12
Jensen MP1516BT Owner'S Manual preview
MP1516BT
Brand: Jensen Pages: 48
Tellur Paidia TLL161091 User Manual preview
Paidia TLL161091
Brand: Tellur Pages: 7

Brands by name

Popular brands

Load more brands