manualshive.com logo in svg

Xirrus Wi-Fi Array XR4420, User Manual

The Xirrus Wi-Fi Array XR4420 offers exceptional wireless connectivity. To fully utilize its features and settings, a comprehensive User Manual is available for free download at manualshive.com. This manual ensures an effortless setup and optimization process, maximizing your Wi-Fi Array experience.

Share
Download
background image

Wireless Array

Viewing Status on the Wireless Array

143

IDS Event Log Window

This status only window displays the Intrusion Detection System (IDS) Event log, 
listing any detected attacks on your network. For descriptions of the types of 
attacks detected, as well as the settings to fine-tune IDS on the Array, please see 
“Intrusion Detection” on page 291. 

The displayed messages may be filtered by using the 

Filter Event 

setting, which 

allows you to select just one type of intrusion to display. For example, you may 
choose to display only beacon flood attacks.

Figure 89. IDS Event Log 

Use the 

Highlight Event

 field if you wish to highlight all events of one particular 

type in the list. Click on the 

Refresh

 button to refresh the message list, or click the 

Auto Refresh

 check box to instruct the Array to refresh this window 

automatically. 

Although there are no configuration options available in this window, you do 
have the usual choice of deciding how the event messages are sorted by clicking 
in the column header for the desired field.

Time Stamp

 — the time that the event occurred.

IAP

 — the  affected  radio.

Channel

 — the  affected  channel.

Event

 — the type of attack, as described in 

Intrusion Detection

. 

SSID

 — the SSID that was attacked.

MAC Address

 — the MAC address of the attacker. 

Period

 — the length of the window used to determine whether the count 

of this type of event exceeded the threshold.

Summary of Contents for Wi-Fi Array XR4420









































































































































































































Reviews:

No comments

Related manuals for Wi-Fi Array XR4420

Jam Audio XT Quick Start Manual preview
XT
Brand: Jam Audio Pages: 6
GE Concord express Troubleshooting Instructions preview
Concord express
Brand: GE Pages: 3
GE Concord express User Manual preview
Concord express
Brand: GE Pages: 32
Dali CONCEPT 1 User Manual preview
CONCEPT 1
Brand: Dali Pages: 16
Garmin GMA 340 Supplemental Operation Manual preview
GMA 340
Brand: Garmin Pages: 10
salmson ZOOM Installation And Operating Instructions Manual preview
ZOOM
Brand: salmson Pages: 12
IDS X64 Quick Programming Manual preview
X64
Brand: IDS Pages: 36
Unipar Sentinel Manual preview
Sentinel
Brand: Unipar Pages: 10
S2G TRAVEL User Manual preview
TRAVEL
Brand: S2G Pages: 32
Cyrus CD7 User Instructions preview
CD7
Brand: Cyrus Pages: 6
iDance Energy XD2 Manual preview
Energy XD2
Brand: iDance Pages: 36
Salda RIRS 2500VE EKO 3.0 Technical Manual preview
RIRS 2500VE EKO 3.0
Brand: Salda Pages: 58
Laars Mighty Therm 2 Installation And Operation Manual preview
Mighty Therm 2
Brand: Laars Pages: 9
The Fisher FUTURA F-5593 Operating Instructions And Warranty preview
FUTURA F-5593
Brand: The Fisher Pages: 20
American Audio Lab GO-210 TUTTI User Manual preview
GO-210 TUTTI
Brand: American Audio Lab Pages: 31
Jensen Marine MSR3012 Installation And Operation Manual preview
MSR3012
Brand: Jensen Marine Pages: 18
Karma HPS T252 Instruction Manual preview
HPS T252
Brand: Karma Pages: 12
Clas Ohlson FWIP-108 Instruction Manual preview
FWIP-108
Brand: Clas Ohlson Pages: 2

Brands by name

Popular brands

Load more brands