manualshive.com logo in svg

Xircom OP-720-69001 - Xircom RealPort CardBus Ethernet 10/100, User Manual, Page: 9 / 36

Share
Download
Xircom OP-720-69001 - Xircom RealPort CardBus Ethernet 10/100 User Manual Download Page 9

CHAPTER 2

Windows 95 

and 98

 Installation

Use these instructions for a first-time installation under Windows
95 and 98. For additional information, see the Help file
HELPDOCS.HLP on the Windows 95/98/NT Installation Disk.

If you have previously installed a Xircom CreditCard
Ethernet 10/100+Modem 56, just insert the RealPort Inte-
grated PC Card. No new installation is required.

1

With the computer ON and Windows 95 or 98 running, insert
the RealPort Ethernet 10/100+Modem 56 into the PC Card slot.

2

The RealPort PC Card will be detected as a “Xircom Ethernet
10/100 + Modem 56.” (If not detected, see troubleshooting later
in this chapter.)
•

Windows 98 and 95 Version 950b (OSR2) and later:

Computer detects card and displays Update Device Driver
Wizard.

•

Version 950/950a:

 Computer detects card and displays

Xircom Ethernet 10/100 + Modem 56. Select Disk pro-
vided by hardware manufacturer, click OK.

3

Insert the Xircom Windows 95/98/NT Installation Disk and
follow the prompts to complete the installation.

4

Windows 95 or 98 will recognize the modem and network
functionality of the RealPort PC Card.

5

If prompted for Windows 95 or 98 networking files, click OK at
the Insert Disk screen.

6

At the Copying Files screen, specify the path to Windows 95 or
98 files (usually 

c:\windows\options\cabs

), click OK.

7

If prompted to restart, choose No. Proceed to step 8.

Summary of Contents for OP-720-69001 - Xircom RealPort CardBus Ethernet 10/100





































Reviews:

No comments