2-4
RealPort Ethernet 10/100Modem 56 User’s Guide
Any device attempting to use the same memory segments as
another device will cause the card to fail initialization.
Ideally there should be 12K of contiguous memory starting
with the first 4K block following the video drivers, which
typically load in the C0000-C7FFF range. This varies from
computer to computer. The memory range identified for the
Xircom card is any block in the C0000-E7FFF range. On many
computers, use of the range D0000-DFFFF is optimal. Be
aware that not all blocks of memory are available.
Failure to access to network resources may be due to Win-
dows 95 or 98 network configuration issues.
1
In Control Panel, double-click the Network icon.
2
In the configuration window verify that the correct Network
Clients are installed.
•
To install a Microsoft Network Client, click Add. Double-
click Client. Under the Manufacturers list, select Microsoft.
Double-click Client for Microsoft Networks.
•
To install a Novell Network Client, click Add. Double-
click Client. Under the Manufacturer list, select Microsoft.
Double-click Client for NetWare Networks.
3
In the configuration window verify that the correct Network
Protocols are installed.
•
To install the native Microsoft Network Protocol, double-
click Protocols. Click Add. Under the Manufacturers list,
select Microsoft. Double-click NetBEUI.
•
To install the IPX/SPX compatible Protocol, double-click
Protocols. Click Add. Under the Manufacturers list, select
Microsoft. Double-click IPX/SPX compatible Protocol.
If necessary, consult your network administrator for
additional information regarding client and protocol
configuration details.