manualshive.com logo in svg

Xircom OP-720-69001 - Xircom RealPort CardBus Ethernet 10/100, User Manual, Page: 5 / 36

Share
Download
Xircom OP-720-69001 - Xircom RealPort CardBus Ethernet 10/100 User Manual Download Page 5

Hardware Installation  

1-1

CHAPTER 1

Hardware Installation

Introduction

The Xircom RealPort™ Ethernet 10/100+Modem 56 Integrated PC
Card supports 10Mbps and 100Mbps Ethernet networks and
modem speeds up to 56Kbps using either V.90 or K56flex stan-
dards. It plugs into your computer’s Type III or dual Type II PC
Card slot for LAN and modem connections. A mobile phone
connector is also provided.

Model REM56G-100BTX Integrated PC Card

Integrated Ethernet LAN, modem, and telephone pass-thru
connectors provide connectivity without extra cabling. Standard
RJ-45 Ethernet and RJ-11 telephone cables plug directly into the
Integrated PC Card. Two RJ-11 ports allow for both modem and
telephone handset connections, if local regulations permit.

For 100Mbps Ethernet operation, Category 5 (data grade)
unshielded twisted pair (UTP) cabling is required.

Software Supplied

Xircom drivers and other software are supplied on 3.5-inch 1.44
megabyte disks. Network operating systems supported include
Novell NetWare, Microsoft Windows 95, 98, NT, and 3.x/MS-DOS,
and IBM OS/2.

Additional Software and Documentation

Easy-to-use installation software is provided on the Xircom
installation disks. A suite of Windows utilities is also supplied.
Documentation is supplied in this User’s Guide and in the Win-
dows Help file HELPDOCS.HLP on the installation disks.

Summary of Contents for OP-720-69001 - Xircom RealPort CardBus Ethernet 10/100





































Reviews:

No comments