XiNCOM Twin WAN XC-DPG503 User Manual Download Page 87

Page: 87 / 108

Twin WAN Series – User Guide | v1

Section 2: Email Alert

The email alert feature will send a warning email to the system administrator and inform
that one of the WAN ports was disconnected.

Figure 24. Email Alert Console

Email Alert - Settings

Email Alert

Enable

- This will enable email alert to send an warning email when WAN port

was disconnected.

Disable

- This will disable email alert not to send an warning email when WAN

port was disconnected.

Email Alert Configuration

Email Sender Address

- Input an email address that sends a warning email to a

recipient. The warning email will inform the recipient if there is any problem on
either or both WAN ports.

Email (SMTP) Server Address

- This sets the email server to where the warning

email will be sent to.
For example:

mail.domain.com

Email (SMTP) Server User Name

-This authenticates the user name of email

sender (optional).

Email (SMTP) Server Password

- Input the user password

Summary of Contents for Twin WAN XC-DPG503













































































































Search results

Summary of Contents for Twin WAN XC-DPG503

Reviews:

Brands by name

Popular brands

XiNCOM Twin WAN XC-DPG503, User Manual

Search results

Summary of Contents for Twin WAN XC-DPG503

Reviews:

Brands by name

Popular brands