XiNCOM Twin WAN XC-DPG503 User Manual Download Page 102

Page: 102 / 108

Twin WAN Series – User Guide | v1

Appendices

Appendix A: Specifications

Model

XC-DPG502
XC-DPG503
XC-DPG602
XC-DPG603

Dimension

245mm (W) x 137mm (D) x 30mm (H)

Operating Temperature 0° C to 40° C

Storage Temperature

-10° C to 70° C

Network Protocol

TCP/IP

Network Interface

6 Ethernet:
4 x 10/100BaseT (RJ45) auto-Switching Hub ports for LAN
devices
2 x 10/100BaseT (RJ45) for WAN

LEDs

8 LAN
4 WAN
1 Status
1 Power

External Power
Adapter

5 V 1.5A DC

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may
cause undesired operation.

CE Marking Warning

This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.

101

Summary of Contents for Twin WAN XC-DPG503













































































































Search results

Summary of Contents for Twin WAN XC-DPG503

Reviews:

Brands by name

Popular brands

XiNCOM Twin WAN XC-DPG503, User Manual

Search results

Summary of Contents for Twin WAN XC-DPG503

Reviews:

Brands by name

Popular brands