manualshive.com logo in svg

XiNCOM Twin WAN XC-DPG503, User Manual

Share
Download
XiNCOM Twin WAN XC-DPG503 User Manual Download Page 47

Twin WAN Series – User Guide | v1 

 

Private IP Address (LAN) 

Enter the IP address of the PC you wish to associate with this WAN port IP address. This 
IP address should be fixed or reserved.

 (See the Host IP section for details on reserving 

an IP address) 

 

Access Group 

You can decide which users to have the authority of using DMZ by defining the groups.  

Direction 

For DMZ you can set the traffic direction to inbound, outbound, or both (bi-directional). 

 
 

Universal Plug & Play (UPnP) 

The 

UPnP

 function can easily setup and configure an entire network, enable discovery, 

and control network devices and services. 

When 

UPnP

 is enabled, an icon will show up on network neighborhood (Microsoft 

Windows OS) using the model name of your Twin WAN Gateway (XC-DPG502, XC-
DPG503, etc.). Every time you add a new network device with port mapping, the new 
network device will appear on the mapping list. 

Copyright © 2005 WINS International, LLC dba XiNCOM | All rights reserved. 

46

Summary of Contents for Twin WAN XC-DPG503













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands