xiC - Technical Manual Version 1.16
51
3.9.
xiC Flex cable interface
The flex cable interface is located on the back of the camera and comes with two different options based on the orientation the
cable plugs into the camera. The (FL) version of the camera allows the cable to approach from the bottom of the camera and
the (FV) version has the cable connecting to the camera perpendicular to the sensor surface.
Camera model
Connector
Camera model
Connector
-FL
Molex 502244-1530
-FV
Molex 502231-1500
Table 3-28 Connector part numbers
3.9.1.
Flex Connection Location
Figure 3-36 Flex connector location FL version
Figure 3-37 Flex connector location FV version
3.9.2.
Pinning
Pin
Signal
Technical description
1
GND
Ground for power return and for SuperSpeed signal return
2
SSRX-
SuperSpeed receiver differential pair; Accepted SSRX+
3
SSRX+
SuperSpeed receiver differential pair; Accepted SSRX-
4
GND
Ground for power return and for SuperSpeed signal return
5
SSTX+
SuperSpeed transmitter differential pair; Accepted SSTX-
6
SSTX-
SuperSpeed transmitter differential pair; Accepted SSTX+
7
GND
Ground for power return and for SuperSpeed signal return
8
D+
USB 2.0 differential pair
9
D-
USB 2.0 differential pair
10
GND
Ground for power return and for SuperSpeed signal return
11
VBUS
+5V Power input
12
VBUS
+5V Power input
13
OUT1
Trigger/sync digital Output (GPO) - Open collector NPN
14
IN/OUT GND
Common pole (IO Ground
15
IN1
Trigger/sync digital Input (GPI) Current limited input
Ground pins
SGND
Shield of FPC cable connected to shield of host controller
Table 3-29 Pin list for flex cable
Flex cable connector
xiC
1
2
3
4
MC023CG-SY-FL
CACAF1623001
Ma
de
in SK
U
SB
3.1
Gen 1
xiC
USB 3.0
Super Speed
USB3VISION
Flex cable connect direction
Flex cable connector
xiC
1
2
3
4
MC023CG-SY-FV
CACAV1623001
Ma
de
in SK
U
SB
3.1
Gen 1
xiC
USB 3.0
Super Speed
USB3VISION
Flex cable connect direction
